How to Install CSC Sumsang ( Fast Hard Reset )
How to Install CSC Firmware via Odin
This is the basic guide for installing stock Samsung firmware using Odin. You must download Odin and required official firmware. It will be in the *.zip format. (You can find required CSC at shivacomputermsk.blogspot.in)
1. Downloaded CSC zip file. You will get following files
2. Now, on your PC, run the Odin.exe file (no installation needed).
3. Now, switch off your Galaxy phone and boot into Download Mode by pressing Volume Down + Home button followed by the Power Button. You will see the Green Triangle or theAndroid Logo.
4. Now, connect the device to the PC via USB cable (use original USB cable).Odin should recognize the device and will show the COM Port in the Odin screen.
Note: If your device not detected, install correct driver on your PC for your Galaxy phone. Also, run Odin with administrative privilege (right click and select Run as Administrator).
5. Now, if the unzipped CSC: Browse and select the CSC File. “The file must be having the word CSC in its name”
Note: If any of the files is not present in the firmware, simply SKIP or ignore the File.
7. Select Auto Reboot and F. Reset Time in Odin. Only these two options are required for firmware installation. Leave the rest unchecked.
8. Press the Start Button to begin installation.
Odin will start flashing the firmware and will take near about 5 minutes. Do Not disconnect the device during that interval. Once the flashing process completed you will get a PASS massage in Odin and reboot your phone.
Leave a Comment